You are using an outdated version of Internet Explorer. Please upgrade your browser to improve your experience.

Testimonials

Roll-Kraft Training Benefits Wide Experience Level

We would like to extend a thank you to yourself, Dave, and Roll-Kraft for the professional manner in which you conduct this in depth training.

There was a wide experience level among our participants, and I believe that all of them benefited from the level of training provided, even the 20+ year rollform veterans.

Your knowledge of the material, and willingness to candidly explain in detail was much appreciated!

Mike Collins
Operations Director
ClarkDietrich


Roll-Kraft Great to Work with on First Time Roll Form Tooling Purchase

Chaz,
This was my first experience purchasing roll form tooling and it was a pleasure doing business with Roll-Kraft. From the development process all the way through run-off and delivery, everyone was great to work with. Please convey my appreciation to everyone I worked with on this project.
Yours,
Todd Jenkins
Kinedyne, Corp.

- - - - -


Roll-Kraft Helps Us Avert Line Shutdown
Hi Ovidiu,
Once again, you have proved how much of a valued business associate Roll-Kraft is to our operations.
We received the EW1852-30 reconditioned roll this morning, averting what could have been a potential line shutdown situation.
Thanks to you and your team for such reliable support, much appreciated.
Regards,
Steve Harry,
Cored Wire Manager
- - - - -


Quick Response and Great Product
To All,
I would like to thank Roll-Kraft for your quick response in getting NTI the 3-sets of Roll Dies that I just received. I was able to install them yesterday and they as always worked great.
John Mergel
Newman Technology, Inc.
- - - - -


Tooling looking good and looking forward to next project
John/Gary,
FYI, we installed the Lower Ridge Form Roll tooling this past Friday and I just wanted you to know that everything is looking good with the tooling.
The ridges are sharp, well defined and we want to thank you for doing such a good job with this project.
Now, we would like to move forward with the next part and really start to move on getting the tooling defined and some quotes so I can get the approvals for the Roll Forming portion.
Thanks for everything you have done so far and I am looking forward to working with you on this project.
Rob Wenrich
Manufacturing Engineer
- - - - -


Fantastic Mill Alignment Performed Despite Mill Condition & Time Constraints
Bret/Robert,
I apologize for not having sent an email before regarding the outcome of the Abbey Mill Alignment.
First of all I would like to recognize and commend Tim's job. As always, he has done a fantastic job and worked around the clock with Rick and his guys to get the alignment done in time.
This time we had a pretty rough alignment. We had to fight with some issues we were having with our stands and bearing blocks.
But after all that hard work, the mill started pretty good.
Once again I have to say that we are very pleased with the service provided and we look forward to keep working together on our future mill alignments.
Regards
Jorge M. Bunge
Mill Manager
- - - - -


Tube and Pipe Training Covers Both Classroom Concepts and Specific Mill Issues
The in-house training was excellent because it covered concepts in the class room as well as issues with our specific tube mill.  Roll-Kraft did an amazing job of creating an atmosphere of learning for our team members with various levels of expertise.  
We had people ranging from one week to 20+ years of experience, and they all came away with a better understanding of the key concepts in tube production.  
I appreciated the willingness of Roll Kraft to share presentation materials and their final report so that we have written records of what we covered to review at any time in the future.
Peter
Engineer
Tenneco Litchfield
- - - - -


Roll-Kraft In-Plant Tube and Pipe Training: A Good Mix for All Skill Levels
Good information. A good mix for all skill levels and very informative.
Roger
Team Leader/Operator
Tenneco Litchfield
- - - - -


Quick Response and Taught Us A Lot
John,
Thanks so much for getting this scheduled so quickly. Dave taught us a lot today.
Thanks,
Jim Mast
Co-Owner
Salt Creek Industries
- - - - -


Roll-Kraft Provides Incomparable Service
The service Roll-Kraft provides is like no other. It's just not comparable.
Chilo Lazcano
National Metalwares
- - - - -


We Made the Right Decision to Work with Roll-Kraft
The last time I called Roll-Kraft and spoke with Tim Nahm regarding some issues on tube mill, Tim was on his way out the door for vacation. Despite that, he worked with us to get us what we needed and then called back on his vacation, and called us again when he was back in town to make sure everything was running well.
That kind of customer service is unheard of these days and I really appreciates all the assistance Tim and Bret have offered us over the last couple years. Roll-Kraft did everything they said they would do and we made the right decision to work with Roll-Kraft on the new mill.
Randy Leonard
CAN Technology
- - - - -


Roll-Kraft Responds to Customer Needs with New Setup Package
Roll-Kraft analyzed their customers' requirements on newly tooled projects and developed a thorough documented set-up process. Roll-Kraft engineers started forwarding American Roll Form Products completed set up packages in early March of 2014. These packages have proven to be invaluable to ARF with our multiple facilities and new resources we continue to hire and train as roll form mill operators.
Operator notes and lessons learned tend to get lost or mistranslated over the years, so this tool will be something that can be utilized for years. The customer setup package provides try-out notes and roll drawings, should an operator or set-up personnel have to refer back for troubleshooting.
In the past, ARF has created and utilized its own internal SOP's and WI's for years, but it is great to have this all centralized from the OEM in one document that we can save to our server and be utilized across the entire organization.
Going forward ARF will be utilizing these exclusively and appreciate all the time and effort that Roll-Kraft has put forth to offer this to their customers. It's a great tool to add to the Tool Box!
Randy Myers
American Roll Form
Sr. Technical Director of Product Development
- - - - -


Roll-Kraft Steps it up a Notch by Rolling Out Their New Tooling Setup Package
Chaz,
Just want to say thank you and great job your team has done on your new setup package that you sent me on the last set of roll tooling we purchased.
- Standard Operating Procedures: Goes over setup procedures, gauging of the rolls, inspecting the rolls, aligning the rolls, aligning the entry guides, aligning the side guides, feeding in the strip, aligning the straightening fixture and cutoff. All of this in an easy, step-by-step process and illustrations showing how to do each step. This will make it so much easier to help train new employees as well as retrain existing employees.
- Roll Tryout Record: This explains the type, thickness and strip width used for the tryout as well as what each pass gap was set at during the tryout. Once again, this helps everyone understand the proper gap settings
- Setup Drawings: Easily read drawings showing back spacers, proper roll numbers and where they go, making it so much easier with training
Cannot thank you enough on making it easier to set up and train. Great job Roll-Kraft!
Bob Ladd
GM of Operations
Cemco
- - - - -


Roll-Kraft Solved All of Our Problems
I just wanted to follow up with you on the service call.  
Frank was great!  He's easy going and very knowledgeable.  He solved all of our problems, got us trained and had us back in production the same day.  He's a real asset to Roll-Kraft.
Thanks for the great service.
Regards,
Gregory Hurwitz
Rhino Trunk and Case, Inc.
- - - - -


Expectation of Failure Turns Into Exceptional Project

Bret,
I just wanted to thank you and the Roll-Kraft team for your work on this project.
Honestly, I anticipated a total failure and completely lost afternoon in downtime.  The project had a few bumps, but the tooling performed exceptionally well.
Once again thanks for all the effort!
Joe Frandanisa
Welded Tubes, Inc.
- - - - -


Page 2 of 8 pages  < 1 2 3 4 >  Last ›



Contact Us

Have a technical question?
Need a quote from a
performance specialist?
Get answers 24/7.

95.7%
On-Time Delivery

Find Out How!

Tube & Pipe

Training

Evaluation

Resources

Tech Articles

Roll Forming

Training

Evaluation

 

Tech Videos

REQUEST FORM

Have a technical question? Need a sales quote? Get answers 24/7.

TESTIMONIALS