Rotary Piercing / Vacuum
Contact a sales rep regarding this product
The Roll-Kraft/Ardcor Rotary Slug Vacuum System
Traditionally slug control problems on rotary piercing units can cause a vast array of costly problems such as needing to replace knurl rolls and straightener blocks from slugs being sent through the mill as well as many other costly complications. Yet another big issue is the large pile of slugs that ends up scattered all around the rotary unit that must regularly be removed. The rotary slug vacuum system offered by Roll-Kraft is the ONLY very simple and effective way to eliminate or reduce the costly problems associated with slug control on Rotary Piercing units. By simply supplying an air service with a minimum of 70 psi and routing the supplied vacuum lines you can reduce and/or eliminate problems. Roll-Kraft vacuum systems come complete with slit and bolted vacuum shrouds (shown above) for ease of maintenance and all necessary hoses, fittings, and air preparation components. See the difference and start saving money and time with the Roll-Kraft Rotary Slug Vacuum System. As you can clearly see in the video below, the system works like no other! This level of ease and effectiveness is only available from Roll-Kraft and available to YOU right now! Click on the link below to download a video.
Additional Resources
Download VideoPDF Contact a sales rep regarding this product
Contact a sales rep regarding this product
Rotary Piercing (Punching) Units are excellent for applications where light-gauge, high speed, non-critical hole or slot-punching is required. These units are generally non-driven and are located in front of the rolling mill. They are designed to punch a specific pattern in the strip and incorporate features for improved “timing” and maintenance of system.
Features:
Features:
- Alignment Pin for quick and easy timing of the punches to the Dies
- Hardened & ground profile anti-backlash gears
- Ground positive rest stops for quick repeatable setup of punch engagement and tooling gap.
- Material thickness of .015 to .028
- Can be manufactured vertical or horizontal
The Roll-Kraft/Ardcor Rotary Slug Vacuum System
Traditionally slug control problems on rotary piercing units can cause a vast array of costly problems such as needing to replace knurl rolls and straightener blocks from slugs being sent through the mill as well as many other costly complications. Yet another big issue is the large pile of slugs that ends up scattered all around the rotary unit that must regularly be removed. The rotary slug vacuum system offered by Roll-Kraft is the ONLY very simple and effective way to eliminate or reduce the costly problems associated with slug control on Rotary Piercing units. By simply supplying an air service with a minimum of 70 psi and routing the supplied vacuum lines you can reduce and/or eliminate problems. Roll-Kraft vacuum systems come complete with slit and bolted vacuum shrouds (shown above) for ease of maintenance and all necessary hoses, fittings, and air preparation components. See the difference and start saving money and time with the Roll-Kraft Rotary Slug Vacuum System. As you can clearly see in the video below, the system works like no other! This level of ease and effectiveness is only available from Roll-Kraft and available to YOU right now! Click on the link below to download a video.
Additional Resources
Download VideoPDF Contact a sales rep regarding this product
