Universal/Raft Type Roll Forming Machines
Contact a sales rep regarding this product
Pinion Stands feature two output shafts on fixed vertical centers, mounted in anti-friction bearings and driven by a worm gear set. Gear ratios can be changed without disassembling the pinion stand. Each pinion stand is a completely self-contained unit with its own oil supply and oil level sight gauge.
Mill Housings are of the open window design for mounting spindles, which are carried in bearing box assemblies with anti-friction bearings and proper lubrication fittings. Top spindle assembly is supported by large diameter adjusting screws equipped with micrometer dials for fast, accurate settings. Engraved scales and pointers permit rapid reference settings.
Top and Bottom Roll Spindles are driven from the pinion stands by universal couplings. Quick disconnect arrangement assures fast change-over of tooling. Universal couplings can be disconnected when necessary to idle roll shafts for certain forming applications.
Forming Units and Pinion Stands are mounted on cabinet type, welded steel constructed bases reinforced for rigidity and accurately machined. ARDCOR forming machines are available with any number of stands to suit your specific, present and future requirements.
Optional Features
Additional Resources
PDF Contact a sales rep regarding this product
Contact a sales rep regarding this product
Pinion Stands feature two output shafts on fixed vertical centers, mounted in anti-friction bearings and driven by a worm gear set. Gear ratios can be changed without disassembling the pinion stand. Each pinion stand is a completely self-contained unit with its own oil supply and oil level sight gauge.
Mill Housings are of the open window design for mounting spindles, which are carried in bearing box assemblies with anti-friction bearings and proper lubrication fittings. Top spindle assembly is supported by large diameter adjusting screws equipped with micrometer dials for fast, accurate settings. Engraved scales and pointers permit rapid reference settings.Top and Bottom Roll Spindles are driven from the pinion stands by universal couplings. Quick disconnect arrangement assures fast change-over of tooling. Universal couplings can be disconnected when necessary to idle roll shafts for certain forming applications.Forming Units and Pinion Stands are mounted on cabinet type, welded steel constructed bases reinforced for rigidity and accurately machined. ARDCOR forming machines are available with any number of stands to suit your specific, present and future requirements. Optional Features
- Roll coolant system reservoir built in as an integral part of the base with a centrifugal motorized pump mounted within base. Includes sediment separator in line between reservoir and pump and easily removed, box type screens at drain openings.
- Drive motor, when permissible and possible, mounted inside base to conserve floor space and improve operator safety.
- Extra base length is available as part of original equipment to increase machine capacity at a future date.
- To further improve any roll forming operation a complete line of auxiliary items are available. Some of the items are, adjustable entry tables, adjustable side roll stands, straightener units, etc.
Additional Resources
PDF Contact a sales rep regarding this product
