In House, Online Training
Contact a sales rep regarding this product
INFORMATION:
Training has become a major part of business these days. It is more important than ever that the people who handle the day-to-day tasks in our companies have the best tools and training for the job. In response to that need, Roll-Kraft/Ardcor provides in-house, on-line training programs, presented by our own Robert A Sladky, Vice President of Tube Mill Engineering. These professional, yet informal, presentations are custom tailored to address issues specific to your mills and your personnel.
Roll-Kraft/Ardcor seminars are designed to present universal facts and procedures, matching them tothe experience of the group, and developing a “standard” for your particular company. The “art” of roll forming and tube and pipe making is combined with a scientific approach, which results in faster and more predictable setups and makes troubleshooting an easier process. We pride ourselves on the development and implementation of methods that have proven successful and reliable in the industry.
Issues covered are:
Programs are traditionally held in a conference room, lunch room, or training facility at your plant. “In-house” seminars allow the greatest opportunity for maximum attendance. Prior to the seminar date, a 2-crate display will be shipped to the seminar site. Mr. Sladky will arrive and set up the display the day before the scheduled program. Your site should be able to accommodate a P.A. system, 6-ft. square screen, slide projector, marker board, tooling, and other supportive equipment. The use of these aids and an individual Seminar Guide Book for each attendee makes this program one of the most comprehensive and successful ways to train your personnel. Mr. Sladky will also tour your factory, taking time to review the configuration of your
mills.
Each attendee must be registered prior to the day of training, so adequate supplies are available. There will be approximately 4-6 hours of classroom study and adequate time allowed for questions and answers and input from the audience. Content of the program can readily be adjusted to focus on areas of your local interest.
The afternoon session involves a walk to the mills on the shop floor, when feasible, where the methods taught in the classroom can be fully demonstrated, “hands-on,” and all questions answered. This will cement the concepts discussed throughout the day and move the theory of the training to the reality of the mill.
Each attendee will be awarded a certificate of completion, which will be mailed after the seminar. This will provide documentation of training to satisfy the ever-challenging quality requirements of your customers.
WHO SHOULD ATTEND:
In order to maximize this opportunity, a wide variety of personnel should be in attendance. There will be information applicable to many areas of operation. You will want everyone involved to be working together to achieve a better quality product in less time.
Specific personnel should include:
Additional Fees:
COPYRIGHT:
Roll-Kraft/Ardcor’s seminar presentations are copyrighted under the terms of the U.S. copyright laws. This includes all printed handouts, slides, and verbal presentation materials. For this reason, no recordings or reproductions are allowed without the written permission of Roll-Kraft/Ardcor. There will be no exceptions.
Additional Resources
Contact a sales rep regarding this product
Contact a sales rep regarding this product
INFORMATION:
Training has become a major part of business these days. It is more important than ever that the people who handle the day-to-day tasks in our companies have the best tools and training for the job. In response to that need, Roll-Kraft/Ardcor provides in-house, on-line training programs, presented by our own Robert A Sladky, Vice President of Tube Mill Engineering. These professional, yet informal, presentations are custom tailored to address issues specific to your mills and your personnel.
Roll-Kraft/Ardcor seminars are designed to present universal facts and procedures, matching them tothe experience of the group, and developing a “standard” for your particular company. The “art” of roll forming and tube and pipe making is combined with a scientific approach, which results in faster and more predictable setups and makes troubleshooting an easier process. We pride ourselves on the development and implementation of methods that have proven successful and reliable in the industry.
Issues covered are:
- Mill Alignment
- Setup
- Tooling Maintenance
- Questions and Answers
Programs are traditionally held in a conference room, lunch room, or training facility at your plant. “In-house” seminars allow the greatest opportunity for maximum attendance. Prior to the seminar date, a 2-crate display will be shipped to the seminar site. Mr. Sladky will arrive and set up the display the day before the scheduled program. Your site should be able to accommodate a P.A. system, 6-ft. square screen, slide projector, marker board, tooling, and other supportive equipment. The use of these aids and an individual Seminar Guide Book for each attendee makes this program one of the most comprehensive and successful ways to train your personnel. Mr. Sladky will also tour your factory, taking time to review the configuration of your
mills.
Each attendee must be registered prior to the day of training, so adequate supplies are available. There will be approximately 4-6 hours of classroom study and adequate time allowed for questions and answers and input from the audience. Content of the program can readily be adjusted to focus on areas of your local interest.
The afternoon session involves a walk to the mills on the shop floor, when feasible, where the methods taught in the classroom can be fully demonstrated, “hands-on,” and all questions answered. This will cement the concepts discussed throughout the day and move the theory of the training to the reality of the mill.
Each attendee will be awarded a certificate of completion, which will be mailed after the seminar. This will provide documentation of training to satisfy the ever-challenging quality requirements of your customers.
WHO SHOULD ATTEND:
In order to maximize this opportunity, a wide variety of personnel should be in attendance. There will be information applicable to many areas of operation. You will want everyone involved to be working together to achieve a better quality product in less time.
Specific personnel should include:
- Mill Operators
- Engineering Staff
- Maintenance Personnel
- Tool Room Personnel
- Supervisors
- Management
| Minimum Charge, 0-14 Attendees | $5,500.00 |
| 15 – 20 Attendees | $380.00/per person |
| 21 – 27 Attendees | $365.00/per person |
| Maximum Charge, 28 Attendees or more | $9,900.00 |
| All the above prices do not include speaker expenses or freight for seminar displays. | |
Additional Fees:
- Travel expenses, including airfare, hotel, meals, car rental, and gas.
- Shipping expenses for moving seminar crates to and from your facility.
- Weekend rates for travel or services:
- Saturday: $650.00/day
- Sunday: $750.00/day
- Payment terms are Net 30 Days.
- Credit card billing is available.
- All prices are in U.S. Dollars
COPYRIGHT:
Roll-Kraft/Ardcor’s seminar presentations are copyrighted under the terms of the U.S. copyright laws. This includes all printed handouts, slides, and verbal presentation materials. For this reason, no recordings or reproductions are allowed without the written permission of Roll-Kraft/Ardcor. There will be no exceptions.
Additional Resources
Contact a sales rep regarding this product
