Central Lube System

Contact a sales rep regarding this product
  

Central Lube Systems are an excellent investment when it comes to maintaining your rolling mill (or other machine component) and protecting your investment. These systems can automatically lubricate all of the lube points on the machine while it is running production!



Central lube system for weld rolls

  • Unit is completely separate from the main system because weld rolls need more lubrication, more often than the rest of the mill.
  • Contains a one pound reservoir which can last up to 150 eight hour shifts.
  • Each injector is equipped with a fail safe indicator that notifies you if a bearing does not take grease.
  • Each is equipped with a timer, which is adjustable in the number of cycles per hour and is wired into the run circuit of the mill. If the mill isn’t running, the mill doesn’t get greased.

Central system for the breakdown, fin, and sizing section on a typical mill

  • Unit incorporates a four pound reservoir that can last up to 85 eight hour shifts.

Large remote panel to serve the breakdown and fin section

  • Smaller unit serves the sizing section.
  • Remotely located to prevent damage.

System is built in modular units for easy installation
  • Each injector panel has quick-connect fittings. Simply cut the desired length of plastic feed line, push in fitting, DONE, you’re connected.
  • No expensive hoses or lines to replace. Plastic line is very durable, high pressure rated and very inexpensive to replace. Average time to replace a broken or damaged line is 20 seconds.


Additional Resources

PDF Contact a sales rep regarding this product

  
Product (required)

First Name (required)

Last Name (required)

Company (required)

Email (required)

Phone (required)

Comments

Subscribe to the Tech Tips Newsletter