You are using an outdated version of Internet Explorer. Please upgrade your browser to improve your experience.
Are you having problems with your tube and pipe tooling or machine,such as:
If so, you are NOT alone. Roll-Kraft not only understands these types of issues, we can fix them for you too!
However, wouldn’t you rather have the skills and abilities to fix these issues on your own, with your own people? Take a look at the benefits of having Roll-Kraft conduct a training seminar at your facility. During the seminar, we would engage your team to determine the root causes of your tube and pipe problems as we teach best-practices. Training like this is an investment that is essential for your future.
Our experienced staff at Roll-Kraft have heard and seen it all. Our tube and pipe training seminars are led by Robert A. Sladky, Vice President of Tube Mill Engineering. Robert was the recipient of the 2003 TPA Industry Education Activities Award in recognition of his outstanding work in the field of tube and roll form production.
Roll-Kraft has been doing tube and pipe training seminars for over 30 years. This is why we will not conduct any training until we fully understand your expectations. This is extremely important, due to the types of training we offer: hands-on training, right on your mill; in the classroom with visual aids; or both. We will even train your staff on why tube and pipe tooling is designed in a certain way.
Roll-Kraft’s tube and pipe seminars are designed to present universal facts and procedures, matched to the experience of your group, and develop a standard for your particular company. The “art” is combined with a scientific approach, which results in faster and more predictable setups and makes troubleshooting an easier process. We pride ourselves on the development and implementation of methods that have proven successful and reliable in the industry.
See what our customers say. Look through our testimonial page and the rest of the website to see how we continuously improve to make the best products for tube and pipe producers. We are so confident that we will meet your expectations, that if you are not satisfied with any of the training Roll-Kraft provides, we will give you a complete refund.
Use our contact form to request more information about our tube and pipe training and education programs.
Interested in learning more about what is covered at one of our tube and pipe seminars? Read below for a typical seminar agenda. Tube and Pipe Training and Education: Seminar Preparation
Programs are traditionally held in a conference room, lunch room, or training facility at your plant. “In-house” seminars allow the greatest opportunity for maximum attendance. Prior to the seminar date, a 2-crate display with the visual aids will be shipped to the seminar site. Our trainer will arrive and set up the display the day before the scheduled program.
Your site should be able to accommodate a P.A. system, 6-ft. square screen, slide projector, marker board, tooling, and other supportive equipment. Each attendee receives an individual Seminar Guide Book. Our program is one of the most comprehensive and successful ways to train your personnel.
Our trainer will also tour your factory, taking time to review the configuration of your tube and pipe mills in order to best customize the presentation.
Tube and Pipe Training and Education: Topics Covered
Tube and Pipe Training and Education: Seminar Agenda
We must have a registration list three weeks prior to the day of training, so adequate supplies are available. The classroom portion consists of approximately 6-8 hours of classroom study and adequate time allowed for questions and answers and input from the audience. Content of the program can readily be adjusted to focus on areas of your local interest.
A second day of on-line training can be arranged for the next day, or at a later date, where the methods taught in the classroom can be fully demonstrated, “hands-on,” and all questions answered. This will cement the concepts discussed throughout the day and move the theory of the training to the reality of the mill.
Each attendee will be awarded a certificate of completion, which will be mailed after the seminar. This will provide documentation of training to satisfy the ever-challenging quality requirements of your customers.
Who Should Attend:
In order to maximize this opportunity, a wide variety of personnel should be in attendance. There will be information applicable to many areas of operation. You will want everyone involved to be working together to achieve a better quality product in less time.
Specific personnel should include:
Pricing Schedule: Pricing depends on a few factors, such as number of attendees, seminar location, how many trainers, and topics. If roll design is included, a roll tooling engineer will be present. Please note that the following fees may also apply:
Services are on a first-come, first-serve basis and should be confirmed with a purchase order.
Use our Quick Contact form to request more information about our roll forming training or tube and pipe training programs.
Copyright: Roll-Kraft’s seminar presentations are copyrighted under the terms of the U.S. copyright laws. This includes all printed handouts, slides, and verbal presentation materials.
For this reason, no recordings or reproductions are allowed without the written permission of Roll-Kraft. There will be no exceptions.
Have a technical question? Need a sales quote? Get answers 24/7.